top of page

Tutorial: carbon fiber Spoiler MINI GP Style

Updated: Sep 12, 2023

Do you need help to install our MINI GP Style Carbon Fiber Spoiler? Read our guide and download the installation manual! Useful and appreciated by professional workshops and by our car enthusiasts.

Tutorial: carbon fiber Spoiler MINI GP Style


FITTING INSTRUCTIONS:

Preparing the boot to fitment: Remove any existing spoiler or wing before installing this product. Carefully clean any surface between spoiler and boot, including the parts hidden behind the glass

Now, place a side mount on each side of the boot at the desired height, mark through the holes on the metal of the boot and prepare for drilling.


Tutorial: carbon fiber Spoiler MINI GP Style

At this point, take the side mounts off the boot before drilling.


Tutorial: carbon fiber Spoiler MINI GP Style

Drill two 9mm holes per side.


Tutorial: carbon fiber Spoiler MINI GP Style


Now, use a riveter to put the M6 rivets into the drilled holes and to block them tight.


Tutorial: carbon fiber Spoiler MINI GP Style
Tutorial: carbon fiber Spoiler MINI GP Style
Tutorial: carbon fiber Spoiler MINI GP Style
Tutorial: carbon fiber Spoiler MINI GP Style

SPOILER ASSEMBLING: The side mounts show a bracket in carbon fiber with pre-drilled holes.


Tutorial: carbon fiber Spoiler MINI GP Style

Connect one side mount to the wing by inserting the bracket into the wing, use the short screws and screw them through the holes at bottom of the wing but without tightening them completely.


Tutorial: carbon fiber Spoiler MINI GP Style
Tutorial: carbon fiber Spoiler MINI GP Style

SPOILER FITTING: Place the previously half-assembled spoiler onto the boot, then complete the spoiler by placing the other side mount on the other side (operation to be done by two persons)


Tutorial: carbon fiber Spoiler MINI GP Style
Tutorial: carbon fiber Spoiler MINI GP Style

Now, you can tight all the screws, both on the side mounts and under the wing.


Tutorial: carbon fiber Spoiler MINI GP Style

Do the same operation on both sides as shown in the pictures: Your spoiler is now fitted. We suggest you to close boot slowly making sure all screws are perfectly tight and side mounts are sking-tight to the boot.

CONGRATULATIONS!! THE SPOILER IS INSTALLED!


Tutorial: carbon fiber Spoiler MINI GP Style




Here below you can find installation files:

Tutorial Spoiler GP Style - MINI R50/R53/R56/R60/R61 (Eng)
.pdf
Download PDF • 807KB
Tutorial Spoiler GP Style - MINI F56 (Eng)
.pdf
Download PDF • 3.53MB
Tutorial Cover Spoiler R56 F56 ENG
.pdf
Download PDF • 479KB


THANK YOU FOR HAVING CHOSEN OUR PRODUCTS!


Race use only

Caution: sport drive can be dangerous and injury people carefully read fitting instructions


We don’t guarantee that this product excludes the owner from danger for healt or life. the owner is well aware of this risk. functionality, warranty, and durability of this product directly depend on proper fitment, use and maintenance of product: owner is aware and responsible for it.

Fitting RSI c6 products on vehicles which have warranty from the car maker may cause in some states warranty loss or non respect of registration parameters or pollutant emissions parameters.

RSI c6 is not responsible for incorrect fitting from non qualified people. if you are not sure of what you are doing, call a professional. RSI c6 is not responsible for improper use and/or incorrect fitment of RSI c6 products.


⚠️ Attention:

RSI c6 is not responsible for damages to the wing or side mounts if instructions of this manual are not carefully followed. we suggest you to have this wing fitted by a professional.

Comentarios


bottom of page